
Supplier Selection
Part of POD apparel quality
How to check garment sizing across supplier options
A medium from one print-on-demand blank is not necessarily a medium from another.
undefined
A medium from one print-on-demand blank is not necessarily a medium from another. To compare options, check the product-specific guide for a Printify item against the guide for the exact blank selected from ShirtSpace, where the range includes Gildan, Hanes and Bella+Canvas.
Match measurements, not size labels. Printify’s Help Centre lists “Where can I find size guides?”, so open that page for the product in question; the comparison needs each product’s actual chart, not just a help page or a brand name.
Start with one chart you can read. ShirtSpace’s Gildan guide runs the unisex sweatshirt chart from XS to XL: body length 20¼ to 26 inches, chest width laid flat 16 to 20 inches, and sleeve length from centre back 23½ to 33 inches (shirtspace.com). Those are laid-flat garment figures, so check every other chart uses the same method.
Build a comparable measurement table
For each exact product, record its product code, size and chart figures for chest, body length and sleeve where provided. Note whether each figure describes the garment or the body, whether it is laid-flat or around-body, and whether the units are centimetres or inches.
Compare the Printify product guide with the guide for the exact ShirtSpace blank selected. ShirtSpace lists more than 2,000 styles, including Gildan, Hanes and Bella+Canvas, so use a specific garment rather than treating a brand or size label as a match. ShirtSpace’s Gildan size-guide blog post notes that measurements vary between styles such as the G500 (classic fit) and G640 (retail fit), so check the chart for the exact product (shirtspace.com).
Compare like with like: same measurement definition, same units. For jacket charts, chest, sleeve, shoulder and length may be relevant, with optional waist or hip measurements (qualityimprint.com); for blank T-shirts, a chest width measured flat is not a chest circumference (gowdl.com). Note on the order sheet if a jacket will be worn over polos or light fleece, so the size chosen reflects actual use, not a body-only measurement (qualityimprint.com).
Some Australian workwear blanks are bought for compliance as much as fit. A construction crew’s uniforms need high-vis colours and tough, tear-resistant fabrics that meet specific AS/NZS standards, so the size chart is not the only specification to confirm (simplymerchandise.com.au).
Match each size label to the other chart’s closest measurements rather than pairing identical labels automatically. Gildan’s guide notes that many women who wear a size 12 find a Large gives the most exact fit, because unisex sweatshirts run boxier than women’s styles (shirtspace.com). If the relevant dimensions do not align, keep the product guides separate and do not imply the sizes are equivalent.
Order representative samples when the fit decision matters. Measure the chest width (pit-to-pit) and length (shoulder-to-hem) of one sample from each supplier (hoopingstation.com).
Record key garment measurements before a wash check, then follow the proposed care instructions and measure again after drying with the same method (gowdl.com). If the figures move, note the change against that blank before reordering.
Record a supplier’s stated tolerance where available. Gildan lists a tolerance of plus or minus 1 for body length, chest and sleeve, in a chart that runs in inches (shirtspace.com), so a Medium charted at 18 inches chest can arrive at 17 or 19. Do not substitute an assumed tolerance or use an unstated figure as a comparison threshold.
Publish the right guide
Show measurements for the actual product being sold, and explain how customers can compare them with a garment they own. A detailed supplier size chart displayed prominently can help reduce returns.
Avoid one generic “true to size” claim across supplier options. If two blanks have unmatched measurements, keep their product-specific guides separate rather than merging them.
Keep catalogue revisions and sample notes so support staff can identify which blank fulfilled an order when investigating sizing complaints. Treat sample fit as an observation, not a guarantee about every production unit, and repeat the check if the blank or print provider changes.



